If you are a user in a very new squadron or a squadron with a new name who has a version of the distribution which was made before their squadron came into being or prior to a squadron name change. For those members of provisional squadrons, remember that you are members of District 90, not some other district and if you set yourself up as belonging to some other district, your squadron name will not be found

You have received a message from the Report Wizard indicating the DAO is unable to initialize the Jet Engine. There are two files from Microsoft which resolve this problem.

You should download both files and save them on your machine. Then install them by executing each one. These files must be installed in sequence. You must install the MDAC_TYP.EXE file before installing the JET40SP3_COMP.EXE file. Make sure that nothing else is running when you install them.

Download JET40SP3_COMP.EXE

This direct communication capability enables real time generation of roster files and real time application of roster updates. There are three different clients available depending on your operating system and download speed. Download the appropriate ZIP file and then install its contents.

Help Downloading and Installing an MQSeries Client

Once you have installed the MQSeries client and have it working, there should be no reason to uninstall and reinstall it, unless you are changing your operating system or your hard drive has crashed.

If after installing the MQSeries Client it doesn't appear to be working, reboot your machine and try again before calling to say it doesn't work.

You have been notified that your upload to HQ was no good. So far this has always been caused by a Cyclic Redundancy Code match failure which can have a number of causes. See below.

The individual install and configuration processes for Ghostscript and Redmon are a bear. Therefore we have wrapped the individual installs inside an additional install layer that does all of the necessary setup and configuration. All you have to do is to allow it to install to the default directories. If you muck with it, it probably won't work. These facilities are licensed only to non-commercial entities.

The theory of this process is as follows:
You will add a new virtual PostScript printer on your machine and associate it with the RedMon port. All output sent to this printer will be redirected by the Redmon port to GhostScript. GhostScript has been configured to create PDF output.
In addition to these notes, make sure that you read the readme file for further insight. Make sure of the following:
The printer you install must be a PostScript printer.
The printer you install is not real. It doesn't exist. It is Virtual. Therefore choose a good one. We recommend a full function color printer such as the Apple Color LaserWriter 12/600 PS.

To summarize:
1. PLEASE allow the installs to choose their own default directories and do not change them.
2. If you're running some versions of NT you'll have to re-boot after the install. If we designed the install correctly it should tell you if you need to re-boot.
3. After the install is complete, you will have to add a new printer to your system using the Control Panel Add Printer facility. This will be a VIRTUAL printer, i.e. there won't really be any hardware, just a driver, and configuration data. This printer must be a postscript printer. We strongly suggest adding a feature powerful printer such as the Apple Color LaserWriter 12/600 PS. Depending on your how your OS is configured, you may need access to your Windows install CD to locate the proper driver. Remember that this is a VIRTUAL printer so don't let the add printer process print a test page.

When you use the add printer dialog, remember the following:
1. The new virtual printer you are adding will be local to your machine, not on a network.
2. You must set this printer to use port RPT1: which is a redirected port, and which should have been added and configured by the install. If by any chance you see an RPT2 or 3 or higher, use the highest numbered RPT port. This would mean that you already had some redirector ports prior to the installation of RedMon, so RedMon's port will be the last one added i.e. the one with the highest number.
3. The printer you are adding must be a PostScript printer. Some printers are capable of handling both PS (postscript) and another protocol. In this case make sure that you choose the PS driver.
4. Don't let the add printer dialog print a test page.
5. If the add printer dialog provides any ability for bi-directional data/control flow, disable it.

If when printing to this Virtual printer, it appears to not be doing anything, minimize your application window to find the dialog waiting behind it. It will always ask you for the name of the file to create.